3 x Diall Pale Yellow Epoxy Resin & Polymercaptan 2-Part Adhesive 15ml 15g, Set

Suitable for Cardboard, ceramics, chipboard, concrete, fabric, glass, leather, masonry, metal, plastic, rubber & wood
Keep adhesive in a cool, dry place in original packaging for maximum shelf-life
Surfaces should be clean and dry, free from oil and grease. 
Roughen surfaces with emery cloth or sandpaper for best results. 
Reverse cap on tube and push to pierce the metal seal. 
Add equal amounts of resin and hardener into the blister shell and mix thoroughly for approximately 1 minute. 
Apply the epoxy adhesive to both surfaces and mate parts together. 
Remove excess epoxy immediately with acetone based nail varnish remover. 
Note that colder temperatures may slow down fixture and cure speed of product. 
Not recommended for drinking water applications
Keep well out of reach of children and pets. 
Not suitable for food contact. 
Use with proper ventilation. 
Avoid contact with skin and eyes. 
May cause eye/skin irritation with direct contact. 
In case of direct eye contact, flush with water for 15 minutes and consult physician. 
Wash hands and skin thoroughly with soap and water after use. 
If swallowed, seek medical advice immediately and show container label. 
Toxic to aquatic organisms. 
Do not empty into drains